Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone–releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.     

A co-activation strategy for enhancing the performance of hematite in photoelectrochemical water oxidation

Hematite(α-Fe_2O_3) is a promising photoanode for photoelectrochemical(PEC) water splitting.However,the severe charge recombination and sluggish water oxidation kinetics extremely limit its use in photohydrogen conversion.Herein,a co-activation strategy is proposed,namely through phosphorus(P)doping and the loading of CoAl-layered double hydroxides(CoAl-LDHs) cocatalysts.Unexpectedly,the integrated system,CoAl-LDHs/P-Fe_2O_3 photoanode,exhibits an outstanding photocurrent density of 1.56 mA/cm~2 at 1.23 V(vs.reversible hydrogen electrode,RHE),under AM 1.5 G,which is 2.6 times of pureα-Fe_2O_3.Systematic studies reveal that the remarkable PEC performance is attributed to accelerated surface OER kinetics and enhanced carrier separation efficiency.This work provides a feasible strategy to enhance the PEC performance of hematite photoanodes.     

芥子气中毒人员尿液标记物谱分析及其临床诊断应用

该研究基于暴露生物标记物溯源思路,应用于解决芥子气(SM)临床早期诊断、溯源确证难题。建立了芥子气中毒患者尿液中7种游离代谢产物的两步固相萃取/超高效液相色谱-串联质谱(SPE/UPLC-MS/MS)同时定量方法,检出限为5 pg/mL~1 ng/mL,定量下限为10pg/mL~5 ng/mL;结合前期建立的4种游离碱基加合物的同位素稀释-UPLC-MS/MS定量方法,对1例疑似芥子气中毒人员尿液中可能赋存的生物标记物进行了全筛查分析。尿液中共检出3类10种生物标记物,包括首次报道的游离代谢产物芥子亚砜,可确证患者为芥子气中毒;除硫二甘醇外,标记物含量均在暴露后3~4 d达到峰值,随后降低,至7 d仍可检出,其中谷胱甘肽加合物的β裂解产物含量相对较高,可作为芥子气中毒早期诊断与疗效评估的重要指标。     

氮硫共掺杂多孔碳材料的制备及其在锂硫电池中的应用

锂硫电池因其较高的理论容量和对环境友好等优势被视为极具发展潜力的储能装置,但是多硫化物的穿梭效应极大地限制了锂硫电池的实际应用。本文以葡萄糖为碳源,离子液体为氮源和硫源,KCl和ZnCl₂为模板剂,KOH为活化剂,通过热解工艺合成了氮硫共掺杂多孔碳（NSPC）。XPS和极性吸附实验表明N、S杂原子成功引入并且提高了碳材料对多硫化物的吸附能力,有效缓解多硫化物的穿梭效应,而较高的比表面积（1290.67 m²·g^-1）有助于提高硫负载量。负载70.1wt.%的硫后（S@NSPC）作为锂硫电池的正极材料表现出了良好的电化学性能。在167.5 mA·g^-1的电流密度下S@NSPC的首次放电容量为1229.2 mAh·g^-1,远高于S@PC的861.6 mAh·g^-1,且S@NSPC循环500圈后容量为328.1 mAh·g^-1。当电流密度从3350 mA·g^-1恢复至167.5 mA·g^-1时,可逆容量达到首圈放电比容量的80%,几乎恢复至其初始值。     

高活性和高稳定性的核壳结构PtPx@Pt/C催化氧还原

在质子交换膜燃料电池中,金属铂是最高效的阴极氧还原催化剂之一,但是铂昂贵的价格严重阻碍了其在燃料电池领域中的大规模商业化应用.通过铂与3d过渡金属(Fe、Co和Ni)合金化可以有效提高催化剂的氧还原活性,然而在实际的高腐蚀性、高电压和高温的燃料电池运行环境中,铂合金纳米粒子易发生溶解、迁移和团聚,从而导致催化剂耐久性差.同时过渡金属离子的溶出会影响质子交换膜的质子传导,并且一些过渡金属离子会催化芬顿反应,产生高腐蚀性?OH自由基,加快Nafion和催化剂的劣化.与过渡金属掺杂相比,非金属掺杂具有明显优势:一方面,非金属溶出产生的阴离子不会取代Nafion中的质子,也不会催化芬顿反应;另一方面,与3d过渡金属相比,非金属具有更高的电负性,其掺杂很容易调节Pt的电子结构.因此,本文通过非金属磷掺杂合成具有优异稳定性的核壳结构PtPx@Pt/C氧还原催化剂.通过热处理磷化商业碳载铂形成磷化铂(PtP2),经由酸洗处理产生富铂壳层,即PtPx@Pt/C.X射线粉末多晶衍射结果证明了PtP2相的存在,并且进一步通过电子能量损失谱对纳米粒子进行微区面扫描分析以及X射线光电子能谱分析证实了富铂壳层的存在,壳层厚度约1 nm.得益于核壳结构及磷掺杂引起的电子结构效应,PtP1.4@Pt/C催化剂在0.90 V(RHE)时的面积活性(0.62 mA cm–2)与质量活性(0.31 mAμgPt–1)分别是商业Pt/C的2.8倍和2.1倍.更重要的是,在加速耐久性测试中,PtP1.4@Pt/C催化剂在30000圈电位循环后质量活性仅衰减6％,在90000圈电位循环后仅衰减25％;而商业Pt/C催化剂在30000圈电位循环后就衰减46％.PtP1.4@Pt/C催化剂高活性与高稳定性主要归功于核壳结构、磷掺杂引起的电子结构效应以及磷掺杂增加了碳载体对催化剂粒子的锚定作用进而阻止了其迁移团聚.综上所述,本文为设计同时具有优异活性与稳定性非金属掺杂Pt基氧还原催化剂提供新的思路.     

调控碳材料的功函数以大幅度提升其电催化氧还原性能

氧的电催化还原反应是燃料电池装置与金属空气电池的阴极反应,具有重大的研究意义.在众多的非铂催化剂中,碳材料因其低廉的价格以及独特的物理化学性质受到了广泛的关注.自从发现氮掺杂的碳纳米阵列具有优异的氧还原活性后,不同类型的氮掺杂的碳也得到了深入研究.例如近年来兴起的由金属有机框架衍生的氮掺杂的碳材料,兼具丰富的氮位点及良好的三维结构.氮的掺杂对碳原子具有电子调控的作用,是其高氧还原活性的根本原因.本文对金属有机框架衍生的氮掺杂的碳材料进行进一步的电子结构的优化,以提升催化性能.功函是电子逸出表面所需的最少的能量,是材料的电子结构性质之一,其对氧还原反应的影响也有报道,早期以理论计算为基础,探究氧气分子在碳材料表面的解离能与氮掺杂的碳的表面功函的关系,后续则采用开尔文探针显微镜,直接测量了不同元素掺杂的碳表面功函,并建立起功函与氧还原动力学的线性关系.本文通过控制碳材料的功函来调节其电子结构.铯是一种经典的给电子物质,通过将电子注入到掺杂材料表面来降低其功函.因此,本文通过CsCO₃与2-甲基咪唑、Zn(NO₃)₂煅烧形成铯修饰的氮掺杂碳.电镜及XRD均观察不到所得材料中铯的存在,证明碳层中无大颗粒团聚的铯物种.EDS元素分布图表明,铯在碳层中呈原子级均匀分布.Raman谱结果表明,碳的G带发生明显的位置偏移,证明其面内电子结构发生了明显的改变.XPS结果证明铯成功与氮原子配位,通过铯氮键将电子注入到碳骨架.UPS则最终显示,经过铯的修饰,碳表面功函从4.25 eV下降到3.6 eV.表面功函的降低有利于氧气分子的解离,也调节OOH^*中间体的吸附,使其吸附的自由能更接近最优值.材料改性后氧还原性能明显提升,起始电位达到0.91 V vs RHE,半波电位达到0.83 V vs RHE,均接近商业Pt/C催化剂.氧还原反应的动力学电流密度随功函的降低而增大,验证了前人的结论.本文提供了一个较为新颖的电子结构调控策略,为设计新的氧还原催化剂提供了新的思路.     

Preparation and adsorption property of novel inverse-opal hierarchical porous N-doped carbon microspheres

The design of pore structure is the key factor for the performance of porous carbon spheres.In this wo rk,novel micron-sized colloidal crystal microspheres consisting of fibrous silica(F-SiO_2) nanoparticles are firstly prepared by water-evapo ration-induced self-assembly of F-SiO_2 nanoparticles in the droplets of an inverse emulsion system to be used as sacrificial templates.Acrylonitrile(AN) was infiltrated in the voids of the F-SiO_2 colloidal crystal microspheres,and in-situ induced by ~(60)Co y-ray to polymerize into polyacrylonitrile(PAN).After the PAN-infiltrated F-SiO_2 colloidal crystal microspheres were carbonized and etched with HF solution,novel micron-sized inverse-opal N-doped carbon(IO-NC) microspheres consisting of hollow carbon nanoparticles with a hierarchical macro/meso-porous inner surface were obtained.The IO-NC microspheres have a specific surface area as high as 266.4 m~2/g and a molar ratio of C/N of 5.They have a good dispersibility in water,and show a high adsorption capacity towards rhodamine B(RhB) up to 137.28 mg/(g microsphe re).This work offers a way to obtain novel micron-sized hierarchical macro/meso-porous N-doped carbon microspheres,which opens a new idea to prepare high-performance hierarchical porous carbon materials.     

Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

Mo掺杂调控电子结构增强NiS电催化固氮性能

以泡沫镍为骨架,通过水热法制备了Mo掺杂的NiS多级纳米花状结构(Mo-NiS)。在偏压为-0.7 V(vs RHE)下,2 h内,0.83 Mo-NiS(制备时钼、镍物质的量之比为0.83)的电催化固氮速率平均可达4.21μg·cm~(-2)·h~(-1),法拉第效率平均为18%。XPS测试和DFT计算表明,Mo掺杂增加了Ni活性位点周围的电子云密度,提高了电荷传输速率,促使*NNH_2到*N能垒大幅度降低,从而提升了电催化固氮效率。     

碳自掺杂石墨相氮化碳纳米片的制备及其在可见光照射下的光解水产氢性能

石墨相氮化碳(g?C3N4)由于具有对可见光吸收范围较窄和光生载流子分离效率低等缺陷,其光解水产氢活性较差。我们采用简单的一步热共聚法,以尿素和2,4,6?三氨基嘧啶(TAPD)混合物为前驱物,制备碳自掺杂纳米片(CNNS?x,x mg代表掺入TAPD的质量)。X射线衍射(XRD)、元素分析(EA)和X射线光电子能谱(XPS)等测试结果表明,来自TAPD的嘧啶环成功引入g?C3N4共轭体系中,使所得的CNNS?x具有较窄的带隙,较快的光生载流子迁移速率,从而提高其对可见光的吸收效率和光生载流子的分离效率。得益于此,CNNS?x在可见光照射下表现出较好的光解水产氢活性。特别是CNNS?30具有最佳光解水性能,其产氢速率可达57.6μmol·h-1,是g?C3N4纳米片(CNNS)的4倍。